Pipette Repair / Calibration Service Authorization Form

If you have a Labmed client number, please include it.

Company Name / Organization Name

Billing Address

Contact Name:
Contact Name:
Address:
Address:
Same as Billing Address
Return Shipment Method
The price may vary depending on the weight and destination.
Service Requested
Language of Certificate
Calibration Frequency
Repair Cost Estimate

Standard Calibration Services

Please note that pipettes will be calibrated according to the manufacturer's specifications unless specified otherwise by the client. Please choose a service below for your pipettes.

ASTM-E1154-23 This procedure includes the dismantling, cleaning, re-assembling and calibration of the pipette. It also includes a detailed calibration certificate, using 3 different volumes weighed 4 times. (Total of 12 tests per channel).
Calibration Services - ASTM-E1154-23

ISO 8655-6 This procedure follows the ISO 8655 standard used for pipette calibration. It is often chosen by clients needing GLP, ISO 9000 or other quality assurance compliances. It includes the dismantling, cleaning, re-assembling and calibration of the pipette. It also includes a detailed calibration certificate using 3 different volumes weighed 10 times. (Total of 30 tests per channel).
Calibration Services - ISO 8655-6

Calibration Service According to ISO 17025:2017 and CLAS program. This procedure complies with the ISO 17025:2017 standard and the CLAS (available in our laboratory only) program, requiring the testing of pipettes before any work is done to them. It acknowledges the condition of the pipettes upon reception. This is an option for clients needing a stricter compliance guideline. The same number of tests done at reception and after the dismantling, cleaning and re-assembling will be performed according to the standard ISO 8655-6. A calibration certificate is issued, mentioning both tests results, upon reception and after calibration.
Calibration Services - According to ISO 17025:2017

This section applies for verification of pipette(s) only without dismantling, repairing or cleaning, according to the standard below.
Calibration Services - Verification of Pipette(s)

Maintenance Contract

A maintenance contract is available for 100 pipettes or more. On-site calibration is also available, including for small volumes (< 2 µl). Please contact us at 514-395-1090 for more information.

Declaration of Decontamination
Declaration of Decontamination: To ensure safety, please thoroughly wipe the outer surface of the instruments to remove biological contaminants. Use a disinfectant such as 70% ethanol or a mild bleach solution. By checking this box, the client certifies that these instruments have been carefully cleaned and decontaminated, and they pose no risk of bacteriological, virological, chemical, or radioactive contamination.

Important: In order to proceed with the pipette repair or calibration work, the Pipette Repair / Calibration Service Authorization Form must be fully completed and sent along with the instrument(s). Please note that a minimum charge of $75 (before taxes) will be invoiced if the total cost of services performed at the Labmed Solutions laboratory does not reach this amount.
Additional information is available upon request or through our website: www.labmedsolutions.com/contact-us

What is 9+3?

We offer a 24/7 EMERGENCY service

Our goal is to satisfy your organization’s requirements.

INQUIRY NOW

service@labmedsolutions.com

514 395 1090